Go to Top

SA-200.2 Amplifier

The SA-200.2 is a two channel power amplifier rated at 200 watts per channel into an 8 ohm load and 350 watts per channel into a 4 ohm load. The rear panel has XLR and RCA inputs and a remote turn on trigger. Quiet, low distortion operation with unmatched reliability.

The following section describes the SA-200.2 basic specifications. The specifications are subject to change without notice or obligation.

Circuit Type Solid State, Class A/B
Power Output 2 x 200 watts @ 8 Ohms
from 20Hz to 20KHz
2 x 350 watts @ 4 Ohms
from 20Hz to 20KHz
Frequency Response 10Hz – 50KHz +/- 0.1 dB
Signal-to-Noise Ratio >100dB, “A” Weighted
Input Impedance 22K Ohms RCA-unbalanced
22K Ohms – Balanced (XLR)
Voltage Gain 28 dB
AC Power Requirements 117/234 Volts AC @ 50/60 Hz
Break-In Time 100 hours of playing time
Audio Input 2 RCA, 2 XLR
Audio Output 2 pairs of heavy-duty, gold-plated binding posts
THD Less than 0.05% at rated output
Damping Factor Greater than 400 from 10Hz to 400Hz
Remote Trigger 3.3-24v DC at 5mA or greater
Finish Black epoxy coated steel chassis
Silver anodized aluminum faceplate
(black optional)
Weight 65 lbs
Dimensions 7.75” H x 17.7”W x 19.5 ”D